Eclipse - Fujitsu Ten ECLIPSE CD3200 - Manual (Page 58)

58
Operation
Outgoing Calls:
Outgoing call history
Incoming Calls:
Incoming call history
If Outgoing Calls is selected
"DELETE?" and "Outgoing Calls" will
be displayed.
If Incoming Calls is selected
"DELETE?" and "Incoming Calls" will
be displayed.
Deleting preset dial
"DELETE?" and "Preset Dial" will be
displayed.
Deleting all data
"DELETE?" and "ALL" will be
displayed.
Changing the passcode
The passcode for the main unit can be changed.
4 to 8 digits must be used. The default setting is
1234.
Passcode and "0
*******
" will be
displayed.
Up:
Increases the number.
Down:
Decreases the number.
3
Press the [SELECT] (Up/Down)
button to select Outgoing Calls or
Incoming Calls.
4
Press the [ENTER] button.
5
Press the [ENTER] button.
6
When the data in the call history
has been deleted, "COMPLETED"
will be displayed.
1
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Delete.
2
Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select Preset Dial.
4
Press the [ENTER] button.
5
Press the [ENTER] button.
6
When the data in preset dial has
been deleted, "COMPLETED" will
be displayed.
1
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Delete.
2
Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select ALL.
4
Press the [ENTER] button.
5
Press the [ENTER] button.
6
When the data has been deleted,
"COMPLETED" will be displayed.
1
Press the [SELECT] (Up/Down)
button while in the Phone Setting
selection mode to select Change
Code.
2
Press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to input numbers between 0
and 9.