Eclipse - Fujitsu Ten ECLIPSE CD3200 - Manual (Page 76)

76
Various Settings
Making changes with Function Mode
Various Settings A variety of settings can be changed.
Switching the Function Mode
The Menu selection mode is activated.
The function mode is activated.
When the button is pressed, the
setting item changes in the following
order.
STATION NAME
*1 ↔ DISC TITLE *2 ↔
GUIDE TONE ↔ Clock ON/OFF ↔
Clock Adjust ↔ Demo ↔ HD RADIO *3
↔ AUX ON/ OFF *4 ↔ AUX Sens *4 ↔
Steering SW ↔ SIRIUS ID *5 ↔ XM ID *6
↔ Phone Setting *7 ↔ BT Audio Set *8
*1: Cannot make settings other than
for tuner operation.
*2: Cannot make settings other than
for CD/CD changer operation.
*3: This setting can only be chosen
when an optional HD Radio tuner
unit is connected. (Refer to page
86 for details on HD Radio
operation.)
*4: Refer to page 101 for detail on
AUX operation.
*5: This setting can only be chosen
when an optional SIRIUS Satellite
radio tuner unit is connected.
(Refer to page 94 for details on
SIRIUS Satellite radio operation.)
*6: This setting can only be chosen
when an optional XM Satellite
radio tuner unit is connected.
(Refer to page 90 for details on XM
Satellite radio operation.)
*7: For details, refer to "Setting the
Bluetooth hands-free function" on
page 52.
*8: For details, refer to "Bluetooth
audio setup" on page 38.
Setting a station name/disc title
The name of the station being received, or the
title of the CD being played can be set.
ATTENTION
Not available with HD-Radio or SAT radio.
Station Name or Title will be selected
based on the current audio mode
settings.
The title setting mode is activated.
Pressing the button will switch types
from [ABC] (upper-case alphabet
characters) to, [123] (numeric
characters) and then [!“#] (symbols).
1
Press the [ /MENU] button for
more than one second.
2
Press the [SELECT] (Up/Down)
button to select FUNC, and then
press the [ENTER] button.
3
Press the [SELECT] (Up/Down)
button to select a setting item.
1
Press the [SELECT] (Up/Down)
button to select Station Name or
Title.
2 Press the [ENTER] button.
3
Press the [SCREEN/TEXT] button
to select the character type.