Eclipse - Fujitsu Ten CD5405 - Manual (Page 16)

16
ESN security operating procedure
ATTENTION
•If there is a problem with the inserted CD, an [ERR] message
will appear for two seconds and the CD will be ejected. Reinsert
the ejected CD.
•If a CD causes the [ERR] message to appear twice in a row, a
[CHANGE] message will appear for two seconds. Try another
CD.
•Copy protected CD cannot be programmed for Key CD
security.
•The Security indicator will flash whenever the vehicle’s ignition
is switched off.
ATTENTION
•If a CD has already been inserted, a [SEC] message appears,
and then the CD is ejected.
•If a security is activated, programming the Key CD is not
available.
How to operate the ESN (Key CD) security
How to program the Key CD
[DISP FUNC] button
Button [6]
Check that the the unit is in standby. 1
Press and hold button [6], then the [DISP FUNC]
button, and hold both for more than one second. 2
A [SEC] message appears, then in two seconds it will
change to [DISC].
The CD5405 is now ready to accept your Key CD in the
CD slot.
Insert the CD into the slot. 3
A [SEC] message appears, then the Key CD is ejected.