Eclipse - Fujitsu Ten CD5405 - Manual (Page 56)

56
Mounting instruction
Mount the stud bolt to the main unit. 4
Insert the main unit into the mounting sleeve until it locks
in place.
5
Fasten the rear of the main unit using either method [A]
or [B]. 6
Install the bezel on the main unit. 7
TOP TO
P
BEZEL 5
MOUNTING SLEEVE 2
STUD BOLT 8
BUSHING
METAL OF
VEHICLE
DASH BOARD
OR CONSOLE BOX
6
Select method [A] or [B] to suit the interior configuration of the
vehicle.
[A]
TOP TO P
BEZEL 5
MOUNTING SLEEVE 2
STUD BOLT 8
REAR BRACKET 4
SELF TAPPING
SCREW (6 x 16mm)
DASH BOARD
OR CONSOLE BOX
7
HEX NUT (5mm)
METAL OF
VEHICLE
12
HEX HEAD
BOLT (6 x 20mm) 11
HEX NUT (6mm) 13
[B]