Eclipse - Fujitsu Ten CD5405 - Manual (Page 50)

50
If you have a question:
Information Contents Explanation and remedial action to take
INFO 3 DISCS ARE DIRTY OR The loaded disc is dirty or upside down. Check it
DAMAGED for proper orientation and verify it is clean.
INFO 5 CD PLAYER FAILS •The CD player is inoperative for some reason. Go
MECHANICALLY through the CD removal procedure.
•If a CD fails to eject, have your dealer fix the
problem.
INFO 6 WHEN THE CD PLAYER •The temperature in the CD player is too high for
INTERNAL TEMPERATURE operation. Wait till it cools down.
IS HIGH (TO PROTECT
•Resume playing after the “High temperature
PICKUP UNIT) sensed and CD stopped" display disappears. If
the CD still cannot play, have your dealer repair it.
INFO 7 AN INTERNAL POWER •Turn the ACC off once before turning it on once
SUPPLY FAILURE IS again to resume the operation.
OCCURRING •If the function still cannot be restricted, contact
your dealer.
Displayed information (for troubleshooting)
The information listed in the chart below is displayed to show the
status of the CD player. Refer to the chart for the appropriate action.