About this manual, About the mgp 464 multi-graphic processor, Features – Extron electronic Multi-Graphic Processor MGP 464 DI User Manual

Page 10: Preliminar y, Introduction

Advertising
background image

MGP 464 • Introduction

1-2

Introduction

PRELIMINAR

Y

About This Manual

This manual discusses how to install, configure, and operate the Extron MGP 464

multi-graphic processor.
Throughout this manual, the terms “MGP 464”, “MGP”, “multi-graphic processor”,

and “processor” are used interchangeably to refer to all models of the product.

About the MGP 464 Multi-Graphic Processor

The MGP 464 is a four-window RGB and video signal processor that can display up

to four video sources on a single screen in picture-in-picture or picture-by-picture

format. The MGP accepts RGB, HDTV, component, S-video, and composite video

signals on four fully-configurable inputs and 15 virtual inputs; and has one scaled

output. The processor provides switching among inputs and has picture controls

and presets.
The MGP 464 DI is an MGP 464 with a DVI input card installed, providing four DVI

input connectors. The MGP 464 HD-SDI is an MGP 464 with two HD-SDI inputs

and two DVI inputs.
All versions can be controlled remotely via the RS-232/RS-422 interface using

Simple Instruction Set (SIS

™

) commands or the Windows-based control software, or

via an Ethernet LAN using the MGP 464’s embedded Web pages, SIS commands, or

the Windows-based control software.

Features

Four windows

— Up to four windows can be shown on a single display

simultaneously, allowing up to four video and computer sources to be viewed

at once.

Inputs

— The MGP 464 has four fully configurable video inputs, which accept

RGB, HDTV, component, S-video, and composite video signals. In addition to

these four configurable inputs, the MGP 464 DI has four DVI inputs and the

MGP 464 HD-SDI has two HD-SDI and two DVI inputs.

DVI-D Background input

— A DVI input is provided on all models as a means to

display live video from a DVI source as a background.

Virtual inputs

— 15 virtual inputs can be configured through software to accept

standard definition component video, S-video, and composite video.

Output

— All MGP 464 models have one scaled output, available on a set of five

BNC connectors for RGB and a DVI-I connector for DVI.

Picture controls

— Picture controls allow you to adjust the size, position,

brightness, contrast, color, tint, detail, and zoom for each window.

Window and input presets

— Window presets save sizing, positioning, and

priority information. Input presets save input signal type information and

picture control settings.

Window transition effects

— Six types of window transition effects (22 different

effects altogether) seamlessly mute and unmute (close and open) the four

windows.

Freeze control

— Freeze control freezes (locks) a window to the current image.

Advertising
This manual is related to the following products: