Enterasys Networks 802.11 - Manual (Page 127)

5-47
Checking the Configuration on Multiple APs
Checking the Configuration on Multiple APs
The AP Manager provides integrity tests that check for consistent settings across all the
APs in a single group. Use the integrity tests to make sure that the APs in a single wireless
network are configured correctly. To access the tests, click Integrity on the AP Manager
menu bar.
•
The Parameters option tests that all APs are configured with the following:
— Same bridge mode
— Same wireless network name
— Different station name
— Same AP Density setting
— Same transmit rate
— Same Secure Access setting
— Same RTS Threshold
— Same rate limiting setting (AP 2000 only)
— Same upline dump setting (AP 2000 only)
— Same forwarding setting
•
Values not used in LAN-to-LAN mode are not checked when the AP is in
LAN-to-LAN mode.
•
The Firmware Revisions option verifies that all APs have the same version of the
firmware.
•
The additional menu item, Link Test, is used to test the communications quality
between the AP and another wireless device.