Enterasys Networks 802.11 - Manual (Page 29)

1-13
RoamAbout R2 Configuration Examples
RoamAbout R2 Configuration Examples
This section provides configuration examples using the RoamAbout R2 (with the two-slot
option).
Restrictions
•
The RoamAbout R2 slot 2 does not support LAN-to-LAN Multipoint.
•
If two 802.11b PC Cards are installed in the RoamAbout R2 Wireless Access Platform,
one of the PC Cards must be connected to the Range Extender Antenna to prevent radio
interference between the two cards. The antenna must be placed at least two feet away
from the RoamAbout R2.
•
The 802.11 PC Cards must be at least 5 channels apart from each other.
Workgroup Mode (both slots) Example
Figure 1-6 shows a RoamAbout R2 with both slots configured in Workgroup mode.
Figure 1-6: Workgroup Configuration
R2 With Mezzanine Option
WNG_21
Slot 2
Workgroup
Mode
Slot 1
Workgroup
Mode