Using the ap manager, Using the ap manager -4 – Enterasys Networks 802.11 User Manual

Page 76

Advertising
background image

RoamAbout AP Manager

4-4

Using the AP Manager

You can manage APs individually or as a single group. You can group APs based on any
criteria, such as:

•

All APs belonging to the same network are in one group. For example, have one group
for the Accounting network and one group for the Engineering network.

•

To avoid confusion, you should have different groups for APs in an infrastructure
network and APs in a LAN-to-LAN configuration. APs in these configurations are
managed differently.

•

If you have earlier releases of the RoamAbout AP, you can group non-802.11
compliant APs together, separate from the 802.11 APs.

The AP Manager saves each group in a configuration file (*.CFG). When you create a
group, give the file a meaningful name that represents the group, such as Campus for APs
used outside on a college campus, or Engineering if all the APs are used for the Engineering
wireless network.

When you open a configuration file, the APs in the group are displayed in the Managed List
field on the main window (see

Figure 4-1

). You can add or remove APs from the

configuration file. The following lists some of the actions you can perform from the AP
Manager main window:

•

Each time you open the AP Manager, the RoamAbout AP Managed List field is
blank. You need to open a file by clicking File in the menu bar, selecting Open, and
choosing a configuration file. All the APs in that group are displayed in the Managed
List field.

•

If there is a RoamAbout R2 in the list, you are prompted for a password. The password
is the password that you entered when you created the configuration file.

•

To display the settings that the AP is currently using, select the AP in the Managed List
field and click the various buttons, such as Wireless Parameters, Network
Parameters
, and Hardware. Click the Help button in each dialog box for a
description of the dialog box.

•

To check the Signal-to-Noise Ratio (SNR) between the AP and another device in the
same wireless network, select Integrity in the menu bar and select Link Test.

•

To discover all APs in your network, select Selection in the menu bar and Discover.

Chapter 5

contains the procedures to configure APs using the AP Manager.

Advertising