Epson 1250 - Manual (Page 26)

22
Scanning from Start to Finish
Scanning with the EPSON Perfection 1250 PHOTO
If you have an EPSON Perfection 1250 PHOTO scanner, the transparency unit is
included as a separate part. Follow these steps to use the transparency unit:
1. Unplug the AC adapter.
2. Connect the TPU cable to the scanner’s transparency unit connector.
3. Plug in the AC adapter.
4. Open the document cover.
5. Slide your film into the film holder, then place it in the upper-right corner of the
document table, as shown.
basics.book Page 22 Monday, July 16, 2001 4:11 PM