Epson 1250 User Manual
Page 34
30
Problem Solving
Your image is too dark.
■
Try adjusting the brightness with
your application software. Also
check the brightness and contrast
values of your display screen.
■
The dark area around film, such
as the frame of the film holder, is
perceived as white—altering the
exposure of the scanning area
and causing your scans to appear
darker. Set the correct color by
adjusting the marquee (frame
border) so none of the film
holder is selected. See your
electronic Reference Guide for
details.
The edges of the document are not
scanned.
■
If you are using a film holder, the
edges of your film may not be
scanned. If this happens, turn off
Automatic Thumbnail Preview
for Film:
1. In EPSON TWAIN, click
Configuration
.
2. On the
Preview
tab, make
sure the checkbox for
Automatic Thumbnail
Preview for Film
is
unchecked.
When you preview your image,
manually select the area to be
scanned.
■
The document table has
non-readable areas around the
edges. If your document extends
beyond the limits marked on the
basics.book Page 30 Monday, July 16, 2001 4:11 PM