Epson 20 - Manual (Page 102)

To use the HELP menu, follow these steps:
1. Type HELP at the MS-DOS command prompt and press Enter.
2. The screen displays a menu of MS-DOS commands. Use the
cursor keys to highlight the command you want information
about and press Enter.
3. If there is more than one page of information about the
command you selected, you see the prompt PgUp at the top of
the screen. Press the PgUp key to display the rest of the text.
4. To return to the HELP menu, press the ESC key. Press E
SC
again
to exit the HELP program.
To bypass the HELP menu and get information about one command,
follow these steps:
1. At the command prompt, type HELP, followed by the name of
the MS-DOS command you want information about, and press
Enter. For example, to see help information for the COPY
command, type the following and press Enter:
HELP COPY
2. If there is more than one page of information about the
command you selected; you see the prompt PgUp at the top of
the screen. Press
PgUp to display the rest of the text.
3. Press E
SC
to exit the HELP program.
5-24 Using MS-DOS with Your Equity 386