Epson 20 - Manual (Page 103)

You can also request help information for more than one command.
Follow these steps:
1. At the command prompt, type
HELP
followed by the names of
the commands you want information about. Then press Enter.
Separate each command name with a space. For example, to see
help information for the DISKCOPY, FORMAT, and COPY
commands, type the following and press
Enter:
HELP DISKCOPY FORMAT COPY
2. The help information for the first command is displayed first. If
there is more than one page of information about the command
you selected, you see the prompt PgUp at the top of the screen.
Press PgUp to display the rest of the text.
3. Press E
SC
to see the help information for the next command.
4. To exit the HELP program, press E
SC
after viewing the
information for the last command.
Using the Epson MENU Program
Your Equity 386 comes with a program provided by Epson called
MENU. With this program you can display a menu of commands
and select the one you need. MENU is easy to use because it lets you
execute commands without having to remember the exact syntax for
each command.
To access the MENU program, either log onto the directory that
contains the file MENU.EXE (if you have a hard disk) or insert the
Operating 2 diskette into drive A. Type
MENU
at the command
prompt and press Enter. You see this main menu:
File Utilities
Disk Utilities
Mode Settings
Using
MS-DOS
with Your Equity 386 5-25