Epson 20 - Manual (Page 51)

8. Press E
SC
twice. The screen displays the following message and
prompts:
System will now restart
Insert DOS diskette in drive A:
Press any key when ready . . .
9. Press any key to restart the system (the MS-DOS Startup diskette
is already in drive A). Your computer reloads MS-DOS,
displaying the preliminary copyright information and the date
prompt.
10. Press Enter twice to accept the date and time shown.
The system now recognizes the primary partition as drive C and the
extended partition as drive D. The
A
> prompt reappears.
After creating the partitions, you must format each one separately.
Follow the instructions later in this chapter.
Creating the Extended Partition on a 90MB Disk
If you have a 90MB hard disk, follow these steps to create a 58MB
extended partition and divide it into a 32MB drive D and a 26MB
drive E.
1. Insert the working copy of the MS-DOS Startup diskette in drive
A (if it is not there already).
2. At the
A>
prompt, type
FDISK and press Enter. The screen
displays the FDISK Options menu.
3. Press 1 to select the Create DOS Partition option and press
Enter.
4. Press 2 to select the Create Extended DOS Partition option and
press Enter. The screen displays a message similar to this:
Total disk space is 1021 cylinders.
Maximum space available for partition
is 657 cylinders.
Enter partition size . . . . . . . . . .
[657]
Preparing a Hard Disk for Use 3-7