Florabest FHE 550 A1 - Manual (Page 49)

49
MT GB
Do not expose the machine to the
rain. Do not allow the equipment
to become damp or operate it in a
damp environment.
Danger of death by electrocution!
Keep at least 10m away from
power lines.
Caution! Remove the plug immedi-
ately from the plug socket in case
of damage or cutting through of the
mains cable
104
Information of the acoustic power
level L
WA
in dB.
Safety class II
Machines do not belong with do-
mestic waste.
General notes on safety
Before you do any work with the
high pruning saw, make yourself fa-
miliar with all operating parts. Prac-
tise using the saw (sawing logs on
a sawhorse) and get an expe-
rienced user or a specialist to ex-
plain to you the function of the saw,
the way of working, the techniques
of sawing and the personal protec-
tion equipment.
Also, read the following safety in-
structions in order to prevent injury
to people and damage to property:
Observe noise protection and other
local regulations.
Improper maintenance and the re-
moval of safety devices will cause
a risk of serious injury.
Electric safety:
Read the safety instructions in order
to avoid injuries and material dama-
ge.
Protection against of electric shock:
• Connect the high pruning saw only
to a plug socket with leakage-current-
operated circuit breaker (l.c.o. circuit
breaker) with a rated current of not
more than 30 mA.
• Make sure that the mains voltage
agrees with the information of the la-
bel.
• Protect the device against moisture.
The device must not be wet and
should not be operated in a moist envi-
ronment.
• Check the device and the power cable
with plug for damage before every use.
Avoid body contact with earthed parts
(e.g. metal fences, metal posts).
• Employ only extension cords, which
are stipulated for use in the open air.
The flexible lead cross-section of the
extension cord must be at least 1.0
mm 2 . Always roll a cable drum com-
pletely out before use. Check the cable
for damages.
• Damaged cables, coupling and plugs
or connecting leads, not correspond-
ing to the specifications, must be not
be employed. Remove the plug imme-
diately from the plug socket in case of
damage or cutting through of the mains
cable.
• If the power cable for this equipment
is damaged, it must be replaced by
the manufacturer, a customer service
agent of the same or a similarly quali-
fied person in order to prevent haz-
ards.
Working with the high pruning saw:
• When felling timber, observe noise pro-
tection and other local regulations.
Local rules may render necessary a
10 m