Florabest FRP 350 B1 - Manual (Page 8)

8
GB
switch. When the motor has cooled down,
it will restart again on its own.
A height-adjustable plastic hook on the
aluminium tube can be suspended in the
rainwater butt, enabling water to be easily
removed with the use of a hosepipe. The
shut-off tap functions in the same way as
a water tap.
Illustration of the most important
functional parts is to be found
on the cover.
Functional parts
1 Carrying handle
2 Float switch height-adjustment
3 Storage compartment for alu-
minium tubes
4 Float switch cable
5 Floating switch
6 Float switch guide
7 Filter (not shown)
8 Suction foot
9 Pump housing
10 Cable storage area
11 Pressure connection, pump
12 Power supply cable/lead
13 Bottom aluminium tube
14 Middle aluminium tube
15 Aluminium tube with plastic hook
16 Height adjustment screw
17 Pressure connection for garden
hosepipe
18 Shut-off tap
19 Flexible tube
20 Cable clips
21 Hook for suspending the pump
22 3 small sealing rings (already
mounted)
23 1 large sealing ring (already
mounted)
Explanation of the rating plate
a
b
c
d
e
f
g h i j
k
l
m
a Model
b Electrical appliances do not belong in
the domestic waste
c Max. discharge height
d Max. water temperature
e Protection type (watertight)
f Address of the manufacturer
g Maximum permitted immersion depth
h Conformity marking
i Max. pump capacity
j Year of manufacture
k GS marking
l Power consumption
m Input voltage
Scope of Delivery
Carefully unpack the appliance and check
that it is complete:
- Fully assembled pump
- 2 aluminium tubes
- Aluminium tube with plastic hook
- Flexible tube with shut-off valve
- 4 sealing rings (already mounted)
- Cable clip