Florabest FHT 600 A1 - Manual (Page 41)

41
GB MT
or inappropriate use. Certain component
parts are subject to normal wear and are
excluded from the guarantee. In particular,
cutter bars, eccentric drives and carbon
brushes are included here, providing the
complaints cannot be attributed to material
defects.
Furthermore, a condition of the guarantee
services is that the maintenance intervals
indicated in the operating instructions
have been observed and the instructions
for cleaning, care and maintenance have
been followed. Damages due to material or
manufacturer faults will be repaired free of
charge by replacement delivery or repair.
However, this is conditional upon the unit
being returned complete and assembled to
our Service Centre, together with proof of
purchase and guarantee slip.
Repairs that are not covered by the guaran-
tee can be carried out by our Service Centre
for a fee. Our Service Centre will be happy
to provide you with a cost estimate. We
can deal only with equipment that has been
packaged correctly and which has been
sent to us with the correct postage paid.
If you have a justified guarantee claim,
please contact our Service Centre by tele-
phone, from which you will then be advised
on how the claim will be processed.
Caution: The sender shall bear the cost of
any material damages during transport.
In case of complaint or for servicing, please
send your equipment cleaned and with an
indication of the defect, to our service ad-
dress.
Equipment sent in with freight collect
– by bulk freight, express or with other
special freight – are not accepted.
Defective units returned to us will be dis-
posed of for free.
Technical Data
Electrical Hedge Trimmer.... FHT 600 A1
Input voltage rating ..............230V~, 50 Hz
Input power ..................................... 600 W
Safety class ........................................ II
Protection category........................... IP 20
Knife movements per minutes ...........2960
Weight .............................................3,6 kg
Cutting length ...............................600 mm
Cutting capacity ..............................24 mm
Sound pressure level
(L
pA
) ............................84,4 dB (A), K
pA
=3
Sound power level (L
wA
)
guaranteed ...............................98 dB(A)
measured ............... 96,1 dB(A); K
wA
=1,9
Vibration (a
n
)
at the handle ..... 2,248 m/s 2 ; K=1,5 m/s 2
at the bow handle ...2,636 m/s 2 ; K=1,5 m/s 2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
is turned on but is running idle).