Epson 500 Series - Manual (Page 92)

Dial Modifiers
Modifier Description
I Hookflash (0.5 seconds)
Pause (2 seconds)
,
;
Return to command state after dialing
@ Wait for 5 seconds if silent answer
P Pulse dialing
R Reverse to answer mode
S Dial stored number
T Touchtone dialing
W Wait 30 seconds for second dialtone
MNP Command Summary
Command Description
\ A 0 Sets the MNP block size to 64 characters
\ A 1 Sets the MNP block size to 128 characters
\ A 2 Sets the MNP size to 192 characters
\A3 Sets the MNP size to 256 characters
\B3 Sets transmit break to 300ms
%C0 Disable data compression during MNP level 5 reliable link
c o n n e c t i o n
%C1 Enable data compression during MNP level 5 reliable link
c o n n e c t i o n
\ G 0 Disable modem port flow control
\G1 Enable modem port flow control
\ J 0 Disable speed adjust at serial port
\J1 Enable speed adjust to match serial port
\K1 Empty data buffers and immediately send a break to the
remote system
\K3
Send a break to the remote modem in sequence with data
\K5 Send a break to the remote terminal or computer in sequence
with any data received from the serial port
\ N 0 Set normal mode
\N1 Set direct mode
B-6 Fax/Modem