Using the hose reel, Using the spray nozzles, Maintenance, cleaning and care – Florabest Wall-Mounted Hose Box User Manual

Page 13: Disposal

Advertising
background image

15

GB/MT

Installation / Maintenance, cleaning and care / Disposal



Using the hose reel



Hold the end of the hose firmly when unwinding

the hose and pull the hose out of the hose reel

2

.



The hose reel

2

has an automatic stop

function which ensures that the hose is kept at
the desired unwound length. As the hose is
unwound a click sounds from the stop function
every metre. When the desired length has been
unwound, pull out the hose carefully a little fur-
ther until the next click sounds. The hose is then
fixed at the desired unwound length and can
be placed on the ground without it springing
back into the housing by itself.



If you wish to unwind more of the hose, hold

the hose firmly and proceed as described above.



The automatic stop function is cancelled by

pulling the hose quickly past the next click and
then guiding the hose back carefully by hand
into the hose reel

2

.



You can regulate the water jet by turning the

spray nozzle

9

.

Note:



Reduce the pressure if the hose cannot be

properly guided into the housing with the tap
turned on. Either allow some water to flow out
of the hose or turn the water off.



If the hose does not wind back on to the reel

return under its own power, hold it slightly
above hip-height and guide it carefully back
onto the reel.



Using the spray nozzles



Attach the spray nozzle

9

onto the hosepipe

connector with water stop function

10

.



To adjust the water discharge, turn the green

part of the spray nozzle. The spray nozzle can
be used to interrupt the discharge of water. The
connector with the water-stop function interrupts
the water flow when the nozzle is removed
from the turned-on tap. Only use these two
functions for intermittent interruptions of the flow
of water. Never leave the hose unsupervised in
such instances.



Maintenance,
cleaning and care



If the hose reel

2

drips, lift the side cover

3

using a screwdriver. Check the connection
between the reel and the hose and replace the
screw-on cap firmly.



Clean the housing using a slightly moist,

fluff-free cloth.



To clean the inside of the reel, open the door

provided for this purpose on the top of the
hose reel

2

(see Fig. I).



Spray the inside with a vigorous jet of water

and then close the door (see Figs. J, K, L).



Disposal

The packaging is made entirely of

recyclable materials, which you may dis-
pose of at local recycling facilities.

Contact your local refuse disposal authority for
more details of how to dispose of your worn-out
product.

Advertising