Operating – Florabest FAH 18 B2 User Manual

Page 64

Advertising
background image

64

GB

4. When the battery is fully re-

charged unplug the battery

charger (12) from the mains.

5. Press the release button (  10)

on the battery (9) and pull the

battery out of the battery charger

(12).

Used batteries

• If a fully recharged battery lasts for

considerably shorter operating times,

the battery is used up and needs to be

replaced. Only use an OEM battery

pack replacement available from our

Customer Service.

• Always take heed of the applicable

safety instructions as well as the envi-

ronmental protection regulations and

information (see “Waste Disposal and

Environmental Protection”).

Operating

. Wear.suitable.clothing.and.

work.gloves.when.working.

with.the.equipment..

Ensure.that.the.equipment.

is.functional.before.each.

use..The.On/Off.switch.and.

the.safety.switch.must.not.

be.held.closed..They.must.

switch.off.the.motor.when.on.

is.released..Should.a.switch.

be.damaged,.stop.working.

with.the.equipment..Ensure.

that.the.mains.voltage.value.

matches.the.label.on.the.

equipment...

Reduce.the.risk.of.injuries.and.

accidents.by.wearing.person-

al.protection.equipment.and.

ensuring.that.the.unit.is.fully.

functional.

. After.turning.off.the.appli-

ance,.the.blades.will.keep.

moving.for.some.time..Al-

low.the.blades.to.come.to.

a.standstill..Neither.touch.

nor.slow.down.the.moving.

blades..Risk.of.injury!

Note noise protection and local

specifications.

Switching On and Off

Ensure that you are standing in a

firm position with both hands grip-

ping the hedge trimmer away from

the body. Ensure that the trimmer

is in contact with no other objects

before switching on.

. Turning on:

1. Before turning on the unit, re-

move the knife guard (  13).

2. Check that the battery (9) is in

(see “Removing/inserting the

battery”).

3. Press the safety switch (4) at the

front handle (5).

4. Press the On/Off switch (7). The

hedge trimmer will run at top

speed.

Turning off:

5. Release the safety switch (4) or

the On/Off switch s (7).

Checking the battery charge

level

The battery’s (9) charge level is indicated

by the charge state indicator (11).

Press the button (15) on the battery

Advertising