Florabest FRP 350 C2 - Manual (Page 40)

40
GB
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this device has been
checked for quality and subjected to a final
inspection. The functionality of your device
is therefore guaranteed. It cannot be ruled
out that residual quantities of water or
lubricants will remain on or in the device/
hose lines in isolated cases. This is not a
fault or defect and it represents no cause
for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specified.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Intended purpose
The rain barrel pump is intended for pump-
ing water from a rainwater butt or rainwa-
ter collecting tank. It is particularly suitable
for watering plants in the garden.
This device is not suitable for commercial
use. Commercial use will invalidate the
guarantee.
Use of the pump for pumping aggressive,
abrasive, corrosive, inflammable (e.g. mo-
tor fuels) or explosive liquids, salt water,
cleaning agents and foodstuffs is prohib-
ited. The temperature of the liquid to be
pumped must not exceed 35°C.
Contents
Introduction ...............................40
Intended purpose .......................40
General description ....................41
Functional description .....................41
Scope of Delivery...........................41
Functional parts .............................41
Technical data ............................42
Performance data ......................42
Notes on Safety .........................42
Symbols in the manual ....................42
Safety Instructions on the Device ......42
General notes on safety ..................43
Putting into service.....................44
Assembling instructions ...................44
Submerging the pump ....................45
Power supply connection .................46
Switching on and off ......................46
Adjusting the float switch ................46
Cleaning and storage .................46
General cleaning work ...................46
Cleaning the filter...........................47
Cleaning the impeller wheel ............47
Storage .........................................47
Waste disposal and environ-
mental protection .......................47
Trouble-shooting ........................48
Spare parts ................................48
Guarantee .................................49
Repair Service ............................50
Service-Center ............................50
Service Branch ...........................50
Translation of the original
EC declaration of conformity ......51
Exploded Drawings ....................52