Transport, Cleaning, Storage – Florabest FHE 550 B2 User Manual
Page 48: Resharpening of the saw chain, Waste disposal and en- vironmental protection, Accessories enclosed, Spare parts, Gb mt
48
GB MT
Transport
• Put on blade cover (24).
• Ensure that you do not switch on the
equipment when carrying it.
Cleaning
•
Do not use solvents or petrol to do this.
A dry cloth or slightly soapy water are
adequate.
•
Saw chain (1) is to be wiped only with
a dry cloth.
Storage
•
Clean the equipment before putting it
away.
•
Put on blade cover (24).
•
The storage location must be frost free
and dry. Avoid direct sunlight.
•
The storage location must be out of
reach of children.
Resharpening of the saw
chain
Leave the resharpening of a saw chain
to an expert or proceed according to the
instructions of your saw chain sharpener.
Resharpening a saw chain takes some prac-
tice. If in doubt, replacing the saw chain is
preferable.
Waste disposal and en-
vironmental protection
Do not dispose of used oil in the sewage
system or drains. Dispose of used oil in an
environmentally correct manner - bring it to
a waste disposal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Machines do not belong with do-
mestic waste.
Empty the oil tank carefully and
hand in your electric chainsaw at
a disposal center. The plastic and
metal parts employed can be sepa-
rated out and thus recycled use can
be implemented. Ask our Service-
Center for details (see P. 52 for the
address).
Accessories Enclosed
24 Blade cover
12 Shoulder strap
25 60 ml Grizzly-Bio-Oil
26 Allen Key
Spare parts
The following spares are available from
Service-Center (see P. 52). Please indicate
the machine type and the number of the
spare part with your order.
Saw chain .............................3009 1400
Chain bar ..............................3010 0100
Bio chain oil 1 liter ..................3023 0001
Bio chain oil 5 liter ..................3023 0002
If further spare parts should be necessary,
please find the part number on the explod-
ed drawings.