Florabest FRM 1800 B2 - Manual (Page 7)

7
GB
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and times
when the tool is turned on but is run-
ning idle).
The noise and vibration values have been
determined in accordance with the standards
and regulations specified in the declaration
of conformity.
Technical and visual modifications may be
made without notice in the course of further
development. All dimensions, information
and specifications in these operating instruc-
tions are therefore not guaranteed. As such,
no assertion of legal claims can be enforced
on the basis of the operating instructions.
Safety information
This section covers the basic safety regula-
tions when working with the electric lawn-
mower.
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instructions
carefully.
Wear eye and ear protection.
Risk of injury from parts being
thrown up.
Keep nearby people away from the
mower.
Do not expose the equipment to the
damp. Do not work in the rain and
do not cut wet grass.
Caution – sharp cutting blade!
Keep feet and hands away.
Risk of injury!
Switch off the motor and discon-
nect the plug before adjustment or
repair work or if the power cable is
caught or damaged.
Danger of damaged power cable.
Keep the power cable away from
the cutting blade!
Caution!
The lawnmower blade continues to
run after switching off.
Cutting circle
440
Noise level specification L
wa
in
dB.
Protection class II
Do not dispose of electrical
equipment in domestic waste.
General safety information
This equipment may cause serious
injury in the case of improper use.
In order to avoid injury to people
and damage to property, the fol-
lowing safety information must be
observed and users must familiarise
themselves with all operating parts.
Preparation:
• Before using the unit, carefully read
through the instruction manual and famil-
iarise yourself with all of its controls.
• Prior to use, always check the connecting
cable and extension cable for signs of
damage or wear and tear. If the cable
gets damaged during use, it must be