Using the loppers (see fig. d), Setting the cutting angle (see fig. e), Extending the telescopic pole (see fig. f) – Florabest Z31309 User Manual
Page 9
9
GB
Q
Using the loppers (see Fig. D)
j
Loosen the retaining pin of the loppers.
j
Pull the plastic handle down to make a cut.
j
As soon as you have finished working with the loppers, secure with the
retaining pin.
Q
Setting the cutting angle (see Fig. E)
j
Turn the rotating disc clockwise and choose one of the seven available
angle adjustments.
j
Turn the rotating disc anticlockwise to fix it after the angle has been adjusted.
Note: Please ensure that the turning disc is fixed, before starting work.
Q
Extending the telescopic pole (see Fig. F)
j
Loosen the retaining pin to be able to extend the telescopic pole.
j
Extend the telescopic pole to the desired length.
Note: The maximum length of the combination loppers is 2.77 m, the
minimum length is 2 m.
j
Fasten the retaining pin well.
Note: Please ensure after each adjustment that the retaining pin is well secured.