Florabest FHT 600 C3 - Manual (Page 13)

13
GB
Trouble Shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage not on
Check plug socket, cable, line and
plug, where appropriate, have re-
paired through electrical specialist
On/Off switch ( 6)
defective
Repair by Service Centre
Worn carbon brushes
Defective motor
Device runs with inter-
ruptions
Power cable is damaged
Check the cable and have it
changed by the Service Centre if
necessary
Internal loose electrical
connection
Repair by Service Centre
On/Off switch ( 6)
defective
Blades become hot
Blades are blunt
Have the blades ( 2) sharpened
or replaced (Service Centre)
Blades are notched
Have the blades ( 2) checked or
replaced (Service Centre)
Too much friction due to
lack of lubrication
Oil the blades ( 2)