Epson S5U1C63000A User Manual
Page 187
Advertising
CHAPTER 8: DEBUGGER
S5U1C63000A MANUAL
EPSON
173
(S1C63 FAMILY ASSEMBLER PACKAGE)
• Both the start and end addresses must be specified within the setup range of each option. An error
results if this limit is exceeded.
Error : FO address out of range, use 0-0xEF
... Specified address for the function option is outside the range.
Error : SO address out of range, use 0-0x1FFF
... Specified address for the segment option is outside the range.
Error : MLA address out of range, use 0-0xFFF
... Specified address for the melody data is outside the range.
• An error results if the start address is larger than the end address.
Error : end address < start address
• The default value of option data is 0.
GUI utility
None
Advertising