Epson S5U1C63000A - Manual (Page 343)

Buttons
[Pack] button
Packs the ROM data file and option document file to create a mask data file for
presentation to Seiko Epson.
[Unpack] button
Restores files in the original format from a packed file.
[Device INI Select] button
Loads the device information definition file (s1c63xxx.ini).
[Help] button
Displays the version of winmdc.
Tool bar
Mask Data Checker winmdc (2) Development Tools
Menus
End
Terminates winmdc.
Pack
Packs the ROM data file and option document file to create a mask
data file for presentation to Seiko Epson.
Unpack
Restores files in the original format from a packed file.
Device INI Select
Loads the device information definition file (s1c63xxx.ini).
Version
Displays the version of winmdc.
[File] menu
[Tool] menu
[Help] menu
I/O Error Messages
File name error Number of characters in the file name or extension
exceeds the limit.
Illegal character Prohibited characters have been entered.
Please input file name File name has not been entered.
INI file is not found Specified device information definition file (.ini)
does not exist.
INI file does not include MDC information Specified device information definition file (.ini)
does not contain MDC information.
Can't open file : xxxx File (xxxx) cannot be opened.
Can't write file: xxxx File (xxxx) cannot be written.
ROM Data Error Messages
Hex data error: Not S record. Data does not begin with "S".
Hex data error: Data is not sequential. Data is not listed in ascending order.
Hex data error: Illegal data. Invalid character is included.
Hex data error: Too many data in one line. Too many data entries exist in one line.
Hex data error: Check sum error. Checksum does not match.
Hex data error: ROM capacity over. Data is large. (Greater than ROM size)
Hex data error: Not enough the ROM data. Data is small. (Smaller than ROM size)
Hex data error: Illegal start mark. Start mark is incorrect.
Hex data error: Illegal end mark. End mark is incorrect.
Hex data error: Illegal comment. Model name shown at the beginning of data is incorrect.
Function Option Data Error Messages
Option data error : Illegal model name. Model name is incorrect.
Option data error : Illegal version. Version is incorrect.
Option data error : Illegal option number. Option No. is incorrect.
Option data error : Illegal select number. Selected option number is incorrect.
Option data error : Mask data is not enough. Mask data is insufficient.
Option data error : Illegal start mark. Start mark is incorrect.
Option data error : Illegal end mark. End mark is incorrect.
Segment Option Data Error Messages
LCD segment data error : Illegal model name. Model name is incorrect.
LCD segment data error : Illegal version. Version is incorrect.
LCD segment data error : Illegal segment No. Segment No. is incorrect.
LCD segment data error : Illegal segment area. Display memory address is out of range.
LCD segment data error : Illegal segment
Specified output mode is incorrect.
output specification.
LCD segment data error : Illegal data in this line. Data is not hex number or output mode.
LCD segment data error : Data is not enough.
Segment data is insufficient.
LCD segment data error : Illegal start mark. Start mark is incorrect.
LCD segment data error : Illegal end mark. End mark is incorrect.