Introduction, Bath and shower mixer tap introduction, Intended use – Miomare Sink Mixer Tap / Kitchen Mixer Tap / Bath and Shower Mixer Tap User Manual

Page 24: Parts description, Technical data, Scope of delivery

Advertising
background image

24 GB

Introduction

Bath and Shower Mixer Tap

Introduction

Congratulations on the purchase of your
new product. You have selected a high
quality product. The assembly and oper-

ating instructions are part of this product. Please
carefully read these assembly instructions/instructions
for use before use and observe all instructions.
These installation instructions and instructions for
use contain important installation, set-up and care
information. Please retain these installation instruc-
tions/instructions for use and hand them on to any
future owner.

Intended use

The product is only designed to regulate the hot
and cold water flow. For tub installation only.
Suitable for use with all pressure-resistant hot water
systems such as central heating, continuous-flow
water heater, pressure boiler etc. This product is not
suitable for low pressure water heaters or pressure-
free small storage reservoirs, e.g. wood- or coal-
burning domestic hot water heaters, oil or gas-fired
hot water heaters, or open electrically heated cylin-
ders. When in doubt please consult a plumber or
heating specialist. Any use not specified or product
modification is prohibited and will result in damage.
Any form of use other than the stipulated intended
purpose can cause danger to life and cause injury.
The product is for private use only and is not in-
tended for medical or commercial use. The manu-
facturer accepts no responsibility if the intended
purpose of this unit is not adhered to.

Parts description

1

Handle*

2

Hot/cold plaque*

3

Locking screw*

4

Cartridge cover ring*

5

Cartridge lock nut*

6

Cartridge*

7

Diverter*

8

Tub mixer*

9

Shower connection*

10

Fitting body

11

2 Swivel nuts*

12

Seat mount nut*

13

Seal (seat mount nut)*

14

2 Seals

15

2 Covers

16

2 S-connectors

17

Allen key

* preinstalled

Technical Data

Swivel nut
(water connections):

G ¾“

Shower hose connection: G ½“

Flow rate at 3 bar:
Shower connection:

approx. 17.7 to
18.8 L/min

Bath spout:

approx. 8.5 to
9.2 L/min

Temperature sensor
tolerance:

+/- 2°C

Scope of delivery

1 Bath and Shower Mixer Tap

1

-

13

2 Caps

15

2 S-connectors with silencer

16

2 Seals

14

1 Socket head wrench

17

1 Instructions for assembly/operation

Advertising