Rocktrail Carbon Hiking Poles - Manual (Page 19)

19
Switching cushioning system on/off
To deactivate the cushioning system, tighten the poles, as detailed in the
“Adjusting pole length“ section. Turn the central section of the trekking
pole slightly against the screw direction. You will hear a loud click.
The cushioning system is now deactivated. Turn the central part of the
trekking pole gently in the screw direction to reactivate the cushioning
system.
Using the strap
When using the strap ensure the back of the hand is enclosed by the top
portion of the strap loop, with the Rocktrail logo pointing outward before
holding the grip. Observe the “left“ (L) and “right“(R) markings on the
respective straps.
Adjusting the strap
The strap size can be adjusted using the sliding buttons (A) and the press
button (B). To open the locking mechanism slide the sliding buttons (A) on
both sides of the pole forward using the thumb and index finger (Fig. I).
The strap is now unlocked, allowing you to adjust the size.
Pull the open bottom strap end to tighten the strap (Fig. J).
Pull in the opposite direction to loosen the strap. Secure the strap by
pressing the press button (Fig. K). Adjust the size of the strap so it does not
cut in when holding the grip (Fig. L).
G
H
I J
K L
GB