Enviro 50-1573 - Manual (Page 6)

6
Specifications
D
IMENSIONS
& S
PECIFICATIONS
:
IMPORTANT: When not installing
the optional Hearth Pad on the
unit, the minimum requirements
for protection on combustibles
floors are a width of 620mm
(243⁄8”) & depth of 670mm
(263⁄8”) under the unit.
22 1 /
4
" (565 mm)
33 1 / 16 "
(840 mm)
21 1 /
4
"
(539 mm)
5 13 /
16
"
(147 mm)
26 3 /
8
" (670 mm)
27 7 / 8 "
(708 mm)
24 3 /
8
" (619 mm)
Figure 1: Dimensions of Evolution.
Table 1: Evolution Specifications.
Classification Testing Standard Description
Class I IP-20 EN14785:2006/EN13240:2001/A2:2004 Residential Wood Pellet Heater
Voltage Current Frequency
220 - 240 V 2.0 - 2.3 Amps 50 Hz
Maximum Power Requirement Fuel type Calorific value of Pellet used
525W (1793 BTU/hr) wood pellets - 6mm (1⁄4”) dia. ≥ 5.10 kWh/kg (≥ 7900 BTU/lb)
Maximum Flue Gas Temperature Mean Flue Gas Temperature Mean Flue Gas Temperature (Reduced)
200°C (392°F) 192°C (378°F) 143°C (289°F)
Nominal Heat Output CO emissions from Combustion Energy Efficiency
7.6 KWh (25932 BTU) 0.032% 84%
Reduced Heat Output CO emissions from Combustion (Reduced Output) Energy Efficiency (Reduced Output)
3.2 KWh (10919 BTU) 0.045% 75%
CO
2
at Nominal Output Nominal Fuel Consumption Rate Unit with Full Hopper
8.35% 1.78 Kg/hr (3.95 lb/hr)* ~ 140kg (310lb)
CO
2
at Reduced Output Fuel Consumption Rate (Reduced Output) Hopper Capacity
3.45% 0.83 Kg/hr (1.85 lb/hr)* ~ 40kg (90lb)
*Note: Consumption will vary with the type of fuel used.
Unit Dimensions
Height: 840 mm (33 1 /
16
”)
Width: 565 mm (22 1⁄4”)
Depth: 539 mm (21 1⁄4”)
Hearth Pad:
Width: 619 mm (24 3⁄8”)
Depth: 708 mm (27 7⁄8”)