Eureka 3270 Series - Manual (Page 4)

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com
How to Identify Parts of Vacuum Cleaner
EXT-U Belt
HEPA Filter
HF7
Screen
Filter
DCF21
Brush Roll
Handle
Hose
Power Paw ®
Power Switch
Filter and Screen
(located inside dust cup)
Dust Cup
Nested Crevice Tool
& Extension Wand
HEPA Filter Compartment
Height Adjustment Knob
Brush Roll Cover
Self-Cleaning Duster
(some models)
Duster Activation Lever
Headlight
Cord Retainer
Hose Hook
Dusting Brush
Quick Release Cord Wrap
Carrying Handle
Power Cord
Lower Cord Wrap
Hose Retainer
Handle Release
Maintenance Schedule
Maintenance Schedule is also located on back side of dust cup.
! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.
DUST CUP – Empty after each use
HEPA FILTER HF7 – Replace 6 months
FILTER DCF21 – Check regularly, clean as needed
Close bottom lid
until it clicks.
Align lid at front; press down
until lid snaps into place.
Rinse filter and dust cup;
dry thoroughly.
Press lever to release bottom lid.
Debris will empty.
Empty debris. Pull back
latch to lift off lid.
Pull out filter.
Reinstall filter and
screen inside dust cup.
Rinse dust cup;
dry thoroughly.
BRUSH ROLL – Clean monthly
EXT-U BELT – Replace worn, cut or out of shape belt
Lay flat, grasp cover and pull off. Lift out filter and replace.