Eicon Networks Diva 2440 - Manual (Page 68)

Command Line Reference Page 68
Filter Commands
NEXT
PREVIOUS
Valid context: IP_Filter, Ether_Filter
Sets the active context to the next or previous filter. This allows you to edit the filter.
ADD IP FILTER <number>
Valid context: Profile, Port
Adds a new IP filter at the specified position. A filter that already has the number you specify is
shifted one higher. Use SHOW FILTER to see a list of filters.
ADD ETHERNET FILTER <number>
Valid context: Profile, Port
Adds a new Ethernet filter at the specified position. A filter that already has the number you
specify is shifted one higher. Use SHOW FILTER to see a list of filters.
DELETE FILTER <number>
Valid context: Profile, Port
Deletes the specified filter. Use SHOW FILTER to see a list of filters.
SET FILTER <number>
Valid context: Profile, Port
Sets the active context to the specified filter. This allows you to edit the filter.
Use SHOW FILTER to see a list of filters.
SHOW FILTER
Valid context: Profile, Port, IP_Filter, Ether_Filter
Displays all filters for the current profile. If the active context is set to a specific filter, the list will
include entries defined for the current filter only.
<number> Position where new filter is to be added.
<number> Position where new filter is to be added.
<number> Number of the filter that is to be deleted.
<number> Number of the filter to edit.