Sealey PC195SD - Manual (Page 2)

Item . . . . . . . . . . . . . . Description
1 . . . . . . . . . . . . . . . . . . . . .Handle
2 . . . . . . . . . . . . . . . . . Top section
3 . . . . . . . . . . . .Blower connection
4 . . . . . . . . . . . . . . . . .Filter basket
5 . . . . . . . . . . . . . . . . .Floor nozzle
6 . . . . . . . . . . . . Dry reusable filter
7 . . . . . . . Household collector bag
8 . . . . . . . . . . . . .Safety float valve
9 . . . . . . . . . . . . . . . . .Casters (x4)
10 . . . . . . . . Foam sleeve/wet filter
11 . . . . . . . . Extension wands (x3)
12 . . . . . . . . . . . . . . . . . . . . Switch
13 . . . . . . . . . . . . . . . . . Clasp (x2)
14 . . . . . . Vacuum hose connector
15 . . . . . . . . . . . . . . . . . . . . . .Tank
16 . . . . . . . . . . . . . . . . . . Hose set
17 . . . . . . . . . . . . . . . . Crevice tool
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PC195SD
Motor Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1250W
Supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V-50Hz
Maximum Vacuum Pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 172mbar
Air Flow: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126m³/hr
Drum Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20ltr
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5.54kg
Vac Accessories Ø: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35mm
Filter Type: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Cartridge
Replacement Cloth Filter: . . . . . . . . . . . . . . . . . . . . . . . . . . . PC195SD.CF
Replacement Foam Filters (Pack of 10): . . . . . . . . . . . . . . . . PC200FF10
Optional Dust Bags (Pack of 5): . . . . . . . . . . . . . . . . . . . . . . . . PC200PB5
High powered, lightweight unit with blower facility. Constructed from stainless steel, the drum unit is mounted on four castor wheels. Tool
storage points on head and base. Supplied with 4mtr cable, 3-pin plug and accessory tool kit. Including three rigid extension tubes, cartridge
filter, wet-use foam filter, cloth filter and dust bag.
fig.1
Original Language Version PC195SD Issue No.1 24/07/14 © Jack Sealey Limited
2. INTRODUCTION
3. SPECIFICATION
 WARNING! DO NOT plug in the mains cable. Make sure the plug is disconnected before assembling the vacuum.
4.1. Undo the clasps (Fig.2.2).
4.2. Lift the top section off the container (Fig.2.3).
4.3. Remove the contents from inside the container (Fig.2.4).
4.4. Turn the container upside down and insert the four casters. Check that they are mounted correctly (Fig.2.5).
4.5. Insert the handle into the slots on the power head and pressure into place (Fig.2.6).
4.6. For dry vacuuming, install the supplied dust filter and dust bag (Fig.2.7, Fig.2.8).
4. ASSEMBLY
fig.2