Sealey PC195SD - Manual (Page 5)

Original Language Version PC195SD Issue No.1 24/07/14
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
W e b
email
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
© Jack Sealey Limited
9. TROUBLESHOOTING
Problem Possible Causes Corrective Action
Vacuum will not operate. No power supply Check power supply: cable, circuit breakers, fuses
Faulty power cable Unplug and check the power cable.
If damaged, have it repaired by a professional.
Container full of liquid. Empty container.
Dust comes from the motor The dust filter is missing or Attach or replace dust filter.
cover. damaged.
Reduced efficiency and motor Blockage in the nozzle, hose, Check nozzle, hose and container inlets for
speed/vibration. or the vacuum inlets, or the dust blockage. Take off the dust filter and wash clean it.
filter is blocked by fine dust. Reuse it when it is dry. If necessary use a new dust
filter.