Livarno Z31206A - Manual (Page 11)

11 GB
Preparing for use
Inserting / replacing
batteries
LED spotlight:
Slide the light off the wall bracket
5 .
Remove the cover 7 from the
battery compartment.
If applicable, remove the used
batteries.
Insert three 1.5 V batteries
(type AA) into the battery com-
partment (see Fig. C).
Note: verify correct polarity.
This is shown inside the battery
compartment.
Replace the battery cover. Slide
the light onto the wall bracket.
Infrared remote control:
Remove the battery cover 13
from the battery compartment.
Insert two 1.5 V batteries
(type AAA) into the battery com-
partment (see Fig. E).