Installation – Livarno Z31791B User Manual
Page 9
9
GB
with the appliance. Cleaning and user
maintenance should not be performed
by children without supervision.
Danger to life by electric
shock
Always check lamp for damage be-
fore connecting it to power. Never
use the light if it shows any signs of
damage.
For the prevention of hazards, a dam-
aged cable of this lamp may only be
replaced with a cable which is sup-
plied by the manufacturer or his service
representative.
Before assembly, ensure that the avail-
able mains voltage (230 V ~ 50 Hz)
corresponds to the operating voltage
necessary for the light (230 V ∼ 50 Hz).
Otherwise do not install the light.
Q
Installation
Note: you will need an electric drill for
the installation.
CAUTION! RISK OF INJURY! Please
refer to the operating instructions of your
electric drill.
94799_livx_LED-Unterbauleuchte_Model_B_Content_CZ.indd 9
09.10.13 09:31