Using the led torch as motion sensor (see fig. b) – Livarno Z31330-BS User Manual
Page 13
Advertising
13
GB
Move the sliding switch
4
into the desired
position, to use the following light functions
of the front light (10 LEDs):
Pos. 1: 100 % light power
Pos. 2: 50 % light power
Pos. 3: front light flashes.
Using the LED torch as motion
sensor (see Fig. B)
Plug the LED torch
2
onto the charger
3
.
Plug the charger into the mains socket.
As soon as the motion sensor
5
registers a
movement in dark environments, the side
light (6 LEDs)
7
switches on again for
about 20 seconds (+ / - 5 seconds)
94381_liv_VDE_LED_Taschenlampe_content_PL_SI_CZ_SK.indd 13
26.09.13 08:33
Advertising