Inserting / replacing batteries (see diagram), Switching on / off, choosing the flash function – Livarno Z31768 User Manual
Page 9
Advertising
9
GB/IE
Inserting / replacing batteries
(see diagram)
¾
Remove the battery cartridge
4
out of the product
by turning the base / battery compartment cap
6
anti-clockwise and pulling the battery cartridge
4
out.
¾
Insert three 1.5 V / AA batteries.
Note: Ensure correct polarity. This is indicated on
the battery cartridge
4
.
¾
Insert the battery cartridge
4
back into the product
and turn the base / battery compartment cap
6
clockwise onto the product.
Switching on / off, choosing
the flash function
¾
Press the ON / OFF button
5
to switch the LED
lamp
1
on.
¾
Press the ON / OFF button
5
again. The
SOS-flashing function will now start.
94350_13_Liv_GB_IE_02.indb 9 h1
27/6/13 2:01 PM
Advertising