Livarno Z31303A-BS/Z31303B-BS - Manual (Page 8)

8 GB/IE/CY
Bringing into use / Maintenance and Cleaning
advice may result in eye injury
and/ or loss of sight to people or
animals. Even a weak LED light
beam can cause eye damage.
j Attach the lamp in the desired posi-
tion by means of the clamp
2 .
j CAUTION! RISK OF
SHEARING OR
CRUSHING INJURY!
A large force is required to attach
the lamp. This could result in a risk
of shearing or crushing injury
through trapping parts of your
body.
j Connect the mains connector 5 to
the mains adapter 6 .
j Insert the mains adapter 6 into an
ordinary domestic mains outlet
socket (230–240 V~).
j Use the ON / OFF switch 3 to
switch the lamp on or off.
j Bend the flexible lamp arm 1 to
bring the lamp into the desired po-
sition.
Note: Do not turn the flexible lamp
arm
1 completely about itself or
the mains lead inside the lamp could
be damaged.
Q
Maintenance
and Cleaning
Note: The device requires no mainte-
nance. The LEDs cannot be replaced.
J Do not use any solvents, petrol or
similar. This would cause damage
to the light.
j Pull the mains adapter 6 out of
the mains socket.
CAUTION! DANGER OF ELEC-
TRIC SHOCK! For electrical safety
reasons do not clean the lamp with
water or other liquids and never im-
merse it in water.
j Always use a dry fluff-free cloth for
cleaning the device.
j Never direct the LED light beam on
to reflective surfaces or at people
or animals. Failure to observe this
advice may result in eye injury and /
or loss of sight to people or animals.
Even a weak LED light beam can
cause eye damage.
94316_A-B_LED-Klemmleuchte_Content_GB_CY.indd 8 23.07.13 13:25