Led ceiling light, Intended use, Parts description – Livarno Z31708A/Z31708B/ Z31708C/Z31708D User Manual

Page 12: Technical data, Scope of delivery, Safety information

Advertising
background image

12 GB/MT

LED Ceiling Light

Intended use

This light is suitable only for use in dry rooms. The
light is not intended to be used for commercial pur-
poses.

Parts description

1

Dowel

2

Mains power lead (external)

3

Fabric tube

4

Lamp housing

5

Terminal block

6

Screw

7

Protective cap

8

Spotlight

Technical Data

Operating voltage: 230 V~ 50 Hz

Light bulb:

20 SMD-LED‘s per spotlight
(LEDs not replaceable)

Rated output:

max. 11.5 W

Protection category:

Model number:

Z31708A (triangle, chrome-
plated), Z31708B
(triangle, titanium-coloured),
Z31708C (rail, chrome-
plated), Z31708D (rail,
titanium-coloured)

Scope of delivery

1 LED Ceiling Light
2 Screws
2 Dowels Ø 6 mm
2 Protective caps
2 Fabric tubes
1 Installation instructions

Safety information

PLEASE READ THE ASSEMBLY INSTRUCTIONS
BEFORE USE! PLEASE KEEP THE ASSEMBLY
INSTRUCTIONS IN A SAFE PLACE!

This appliance may be used by chil-
dren age 8 years and up, as well as
by persons with reduced physical,

sensory or mental capacities, or lacking experi-
ence and / or knowledge, so long as they are
supervised or instructed in the safe use of the
appliance and understand the associated risks.
Children should not be allowed to play with the
appliance. Cleaning and user maintenance
should not be performed by children without
supervision.

This lamp is suitable only for use
indoors.

0.5 m

FIRE HAZARD! Fit the light so that
it is at least 0.5 m away from the
material illuminated. Fire can result

from the development of too much heat.

Danger to life by
electric shock

Always check lamp for damage before connect-
ing it to power. Never use the light if it shows
any signs of damage.

Before assembly, ensure that the available mains
voltage corresponds to the operating voltage
necessary for the light (230 V∼).

Do not connect the lamp if this is not the case.
Mount the light so that it is protected from spray
water and moisture.

CAUTION! DANGER OF BURN
INJURIES!
To prevent burns, verify
the light is switched off and has cooled

down for at least 5 min before touching it. Lamps
can become very hot.

102614_liv_LED-Deckenleuchten_Content_ES_IT_PT.indd 12

12.08.14 13:43

Advertising