Livarno BL3710 - Manual (Page 12)

Halogen Desktop Lamp LivarnoLux BL3710
10 - English
Appendix
Replacing the Bulb
š Loosen the three screws inside the lamp shade (3)
using a suitable Phillips screwdriver.
š Remove the protective glass.
š Carefully pull the bulb out of the socket.
š Insert a new bulb of the same type.
š Place the protective glass over the reflector and
tighten the three screws. All three clips located below
the screws must fix the protective glass in place.
Cleaning
To clean the lamp use a dry cloth. Never use any solvents or
cleaners that may damage the plastic housing. Make sure
that no liquid gets into the housing. If the lamp is very dirty,
use a slightly moistened cloth.