Livarno 103738-14-01-BS - Manual (Page 13)

13 GB
Using the LED torch as motion
sensor (see Fig. B)
Plug the LED torch 2 onto the charger 3 .
Plug the charger into the mains socket.
As soon as the motion sensor 5 registers a
movement in dark environments, the side
light
7 switches on again for about 20 sec-
onds (+ / - 5 seconds)
Using the LED torch as light
for orientation (see Fig. B)
You can use the LED torch as a light for orienta-
tion in case of a blackout.
Plug the LED torch 2 onto the charger 3 .
Plug the charger into the mains socket. If the
power fails, the side light
7 lights up and
serves as a light for orientation. As soon as
there is power on the socket again, the side
light switches off.
103738_liv_VDE_LED_Taschenlampe_content_CZ.indd 13 15.10.14 10:36