Livarno Z31392A-BS - Manual (Page 9)

9 GB
Disconnect the lighting product
from the mains if you intend not
to use it for an extended period
(e.g. holiday).
Do not connect the LED strip
light to another strip light.
Safety advice
for installation
The product can be mounted with
the supplied fastenings on to all
surfaces officially classified as
being of “normal flammability”.
Before installation, check
whether the substrate is suitable
for the fastenings and can sup-
port the weight of the product.
If you are unsure about any
aspects of this step, please
seek the advice of an electrical
equipment specialist.
Do not use any sharp and / or
pointed objects, such as wire,
nails or clamps, to fasten the
product in place.
Installation
Note: Thoroughly clean the surface
on to which you intend to install the
product. The surface must be clean,
dry and free of grease. Otherwise
the double-face tape
2 may not
stick properly.