Livarno 7571-01хL - Manual (Page 15)

15 GB
Safety ... / Before Initial Use / Operation / Cleaning and maintenance / Disposal
Allow the lamp to cool for at least 15 minutes
before replacing a defective bulb.
0.3 m
DANGER OF FIRE! Always ensure
that there is at least 0.3 m clear dis-
tance between the lamp and other
items of furniture or furnishings.
Do not allow any objects to cover the lamp.
Fire can result from the development of too
much heat.
Position the lamp so that it is protected from
moisture and dirt.
Never leave the light unattended whilst in oper-
ation. Excessive heat can result in a fire.
Only use the light bulb indicated.
Do not look directly into the light source (light
bulb, LED etc.).
This lamp is not suitable for use as a night light.
Before Initial Use
Loosen the nut 6 from the lamp head 2 by
turning it anti-clockwise (fig. B).
Pull the lamp shade 1 over the lamp head 2
(fig. C).
Tightly screw the nut 6 clockwise back on to
the lamp head 2 (fig. D).
Use a clean, lint-free cloth to insert the lamp.
Screw the light bulb
7 clockwise into the light
bulb socket (fig. E).
Your light is now ready to use.
Operation
Using the lamp
Always ensure that there is at least 30 cm clear
distance between the lamp and other items of
furniture or furnishings.
Unwind the mains cable 4 completely before
use.
Insert the mains plug 5 into the socket.
Turn the light on and off with the ON / OFF
switch 3 .
Replacing a bulb
CAUTION! DANGER TO LIFE BY ELEC-
TRIC SHOCK! Unplug the mains plug 5 from
the socket.
Allow the lamp to cool down for 15 minutes
before replacing.
Turn the defective light bulb 7 anti-clockwise
out of the bulb socket.
Use a clean, fluff-free cloth when you are re-
placing a bulb.
Screw the light bulb 7 clockwise into the light
bulb socket (fig. E).
Cleaning and maintenance
CAUTION! DANGER TO LIFE FROM
ELECTRIC SHOCK! Before cleaning, always pull
out the mains plug
5 out of the socket.
Do not use solvents such as petrol and the like
as they could damage the lamp.
For electrical safety reasons, never clean the
lamp with water or other fluids or immerse it in
water.
Only clean with a dry, lint-free cloth, a brush or
a feather duster.
The lamp is maintenance-free.
Disposal
The packaging consists entirely of envi-
ronmentally friendly materials. They can
be disposed of at your local recycling
facility.
The symbol of the wheelie bin with a
cross through It means that, in the
European Union, the product has to be
disposed of in a separate refuse collection. This ap-
plies to the product and to all components bearing
this symbol. Products marked in this way may not
be disposed of with normal domestic waste but
have to be handed in at a recycling collection point