Livarno Z30503-BS - Manual (Page 10)

12 GB
Safety Instructions

Do not use the article if you detect any kind of damage. The LED
cannot be replaced.

CAUTION! DANGER OF EXPLOSION! Do not
operate the lamp in potentially explosive environments
in which there are inflam mable vapours, gases or dusts.

Protect the light from moisture. Never hang the product in the vicinity
of a wash basin, pond etc. The product and the mains adapter must
never be immersed in water or other liquids. Failure to observe this
advice risks electric shock!

Connect the light to a properly installed mains socket or a suitable
cigarette lighter socket only. The voltages in each case must comply
with information given in the section “Technical data”.

Ensure that the electrical socket is easily accessible so that you can
pull the mains adapter
14
quickly out of the socket if necessary.

Do not carry out any modifications or repairs to the product yourself.
The LEDs cannot and must not be replaced.
 ATTENTION! The protective cover in front of the LEDs is non-replace-
able. Dispose of the lamp when you detect cracks or signs of
breakages in the protective cover.

Never connect the light to a power supply socket if the light, power
lead or mains adapter
14 / cigarette lighter socket 13 are damaged
or the light has been dropped.

Ensure that the power lead cannot become damaged by sharp
edges or hot objects. Unwind all the lead completely before use.

Keep easily flammable materials away the product. Never hang ob-
jects above the light or the mains adapter
14
and never cover them.

Pull the mains adapter 14 / cigarette lighter socket 13 out of the
mains adapter 14 / cigarette lighter socket 13
when you are not using
the light or before you clean it. Do this as well if signs of a fault
develop during use or charging, e.g. smoke, burning smell etc., or
56632_livx_LED-Arbeitsleuchte_Content_LB4.indd 12 29.12.10 13:18