Installation – Livarno Z30310 User Manual
Page 11
13
GB
The product can be installed on
all normally inflammable sur-
faces with the enclosed mount-
ing parts.
CAUTION! RISK OF ELEC-
TRIC SHOCK! Make sure that
there are no power, gas or wa-
ter lines located where you wish
to drill. Check with a cable and
pipe locator if necessary before
you begin drilling.
Before installation, check
whether the surface is suitable
for the mounting parts and the
weight of the product. If you are
in any doubt, consult an electri-
cal specialist for advice.
Do not use sharp and/or
pointed objects such as wire,
nails or fasteners to mount the
product.
Avoid excessive bending of the
product. This can damage the
insulation.
Installation
Note: You will need a crosshead
screwdriver to fit the attachment
clips and screws.
Note: The product is suitable for
mounting on walls or cupboards.
Note: The product can be mounted
on a cupboard or wall with the sup-
plied fastenings on to all surfaces
officially classified as being of
normal flammability.
67027_VDE_livx_LED_Lichtleiste_content_LB4.indd 13
24.06.11 16:22