Livarno 7596-010L/ -014L/ -015L - Manual (Page 47)

47 GB/MT
Safety advice / Operation
  Position the lamp so that it is protected from moisture and dirt.
  Never leave the lamp operating unattended.
  Use the above-indicated bulbs only.
CAUTION! RISK OF INJURY! If protective glass is
broken, replace prior to using the lamp again.
Operation
Using the lamp
  Always ensure that there is at least 20 cm clear distance between
the lamp and other items of furniture or furnishings.
  Unwind the mains cable 4 completely before use.
  Insert the mains plug 4 into the socket.
  Set the lamp head 1 to the desired height with the telescopic arm 5 .
  Set the lamp head 1 in the desired position with the adjustment
lever 2 .
CAUTION! DANGER OF BURNS! If the lamp is switched on,
adjust the lamp head 1 with only the adjustment lever 2 . Do
not touch the lamp head 1 . The lamp head 1 gets very hot
when the lamp is switched on.
  Set the ON / OFF switch 3 into position I to switch on the device.
  Set the ON / OFF switch 3 into position 0 to switch off the device.
Replacing a bulb
c CAUTION! DANGER TO LIFE FROM ELECTRIC SHOCK!
Pull the mains plug 4 out of the socket.