Livarno LTL 27 A1 - Manual (Page 10)

Daylight Lamp LTL 27 A1
English - 8
Appendix
Replacing the Bulb
 Remove the U-bolt in the lampshade (2) whilst gently pushing the bolt end
backwards.
 Carefully pull the bulb directly out of the socket.
 Insert a new bulb of the same type.
 Make sure that the U-bolt is correctly aligned over the pipes of the new
bulb.
Cleaning
To clean the light use a dry cloth. Never use any solvents or cleaners that may
damage the plastic housing. Make sure that no liquid gets into the housing. When
very dirty, use a slightly dampened cloth.
Disposal of Old Devices
If the product is labelled with a struck-out waste bin, it is subject to
the European Guideline 2002/96/EC. All electric and electronic
devices must be disposed of separately from household waste at
established bodies. For environmental protection reasons, bulbs
must be properly disposed of.
Do not dispose of this device in with domestic trash. You can find
out more information on collection points or collection dates from your municipal
administration or local waste disposal company.
Recycle the packaging material properly also. Cardboard packaging can be taken
to paper recycling containers or public collection points for recycling. Any films or
plastic contained in the packaging should be taken to your public collection points.