Livarno LSL 33 A1 User Manual

Page 44

Advertising
background image

Halogen Desktop Lamp LivarnoLux LSL 33 A1

42 - English

Switching the Device On/Off

 Plug the power plug into a suitable and easily

accessible power socket.

Extension cables or multiple outlet strips that do not

meet safety requirements may not be used.

 Switch the halogen lamp on or off using the cable

On/Off switch (2).

Mains Isolation:

The device is only fully isolated from the
mains when the mains plug is pulled out of the
wall outlet. Switching off the device with the
cable On/Off switch does not disconnect the
device from the mains.

Orientating the Lamp

 You can use the U-bolt to orientate the lamp shade

(3) according to your needs.

 To rotate the lamp shade, first loosen the screw on

the top end of the clamp using a suitable screwdriver.

 Then turn the lamp shade into the desired position

and tighten the screw again.

 If you want to permanently fix the position of the lamp,

you can tighten the Phillips screws on all joints using
a suitable screwdriver.

Advertising