Livarno LESB 22 A1 - Manual (Page 10)

8
Assembly / Electrical connection
LESB 22 A1
GB
Electrical connection
WARNING
This appliance falls under Protection Class I.
The earth wire (green/yellow wire) must be connected to the point ►
marked .
Unscrew the four screws at the rear of the connection box and remove the ♦
cover.
First, pull a cable through the cable entry ♦ 9 into the connection box and
secure it to the available cable strain relief.
Connect the cable to the terminals, as shown in the connection diagram. ♦
Replace the cover of the connection box and screw it down fi rmly. ♦
Now switch the power supply back on. ♦
N L
X
Brown or black wire (L)
Blue wire (N)
Green/yellow wire ( )
Fig. Terminal diagram